FIG 95 95 C-Clamp w/ Locknut

10185 95


Size Range: 3/8" and 1/2"

Material: Carbon Steel

Finish: Plain or Zinc Plated

Service: Designed for fastening flange of “W” and “M” beam. Bottom hole tapped to accommodate hanger rod.

Approvals: Complies with Federal Specification A-A-1192A (Type 23), WW-H-171-E (Type 23), ANSI/MSS SP-69 and MSS SP-58 (Type 23). UL Listed (Sizes 3/8"). FM Approved (Sizes 3/8" - 1/2").

Installation: Follow recommended set screw torque values per MSS-SP-69.

Ordering: Specify rod size, figure number, name and finish.

Note: If a retaining clip is desired, you may specify either Fig. 89X or Fig. 89. For length and other ordering information, refer to Fig. 89X and Fig. 89.

Listings, Approvals & Certifications