FIG 212FP 212FP Seismic Bracing Clamp

9521 212


Size Range: 2-1/2" through 12"

Material: Carbon steel

Finish: Plain or Hot-Dip Galvanized with Zinc Plated Bolts & Nuts

Service: For seismic bracing, to be used with Fig. 113 brace fitting. Pipe clamp bolt holes are designed to match holes in brace fitting.

Maximum Temperature: Plain 750° F, Galvanized 450° F

Approvals: Complies with Federal Specification A-A-1192A (Type 4), WW-H-171-E (Type 4), ANSI/MSS SP-69 and MSS SP-58 (Type 4).

Installation: Designed for use with Fig. 113 brace fitting.

Ordering: Specify pipe size, figure number, name and finish.

Standard Figure 212 will be furnished for sizes 2-1/2" thru 4".

Note: The “C” gap dimension should be used at the upper and lower locations to ensure proper installation of the clamp.