FIG 167 167 Insulation Protection Shield

9628 167


Size Range: 1/2" through 24" pipe with up to 2" thick insulation

Material: Carbon steel

Finish: Pre-Galvanized Material

Service: Recommended for outside of foam or fiber glass insulation for distribution of loads to preclude crushing of insulation without breaking the vapor barrier.

Approvals: Complies with Federal Specification A-A-1192A (Type 40), WW-H-171-E (Type 41), ANSI/MSS SP-69 and MSS SP-58 (Type 40).

How to size: Refer to “shield size selection table” in the submittal.

Features: Chamfered cupped ends for safe non-sharp edges.

Ordering: Specify size, figure number and name. Data applicable to shields for thicker insulation or larger pipe sizes is available upon request.