Size Range: 3/4" through 12"
Material: Carbon steel
Finish: Plain, 8" & Smaller: Zinc Plated (Hot-Dip Galvanized optional), 10" & Larger: Hot-Dip
Galvanized with Zinc Plated Bolts & Nuts or Epoxy Coated
Service: Recommended for suspension of insulated stationary pipe lines.
Maximum Temperature: Plain 650° F, Galvanized and Epoxy 450° F
Approvals: Complies with Federal Specification A-A-1192A (Type 1), WW-H-171-E (Type 1), ANSI/MSS SP-69 and MSS SP-58 (Type 1).
Installation: Hanger load nut above clevis must be tightened securely to assure proper hanger performance.
Adjustment: Vertical adjustment is provided, varying with the size of the clevis. Tighten upper nut after adjustment.
- Designed for 2" of insulation on 3/4" through 1-1/2" pipe and 4" of insulation on 2" and larger pipe.
- When properly installed, clevis bolt is outside the insulation.
Ordering: Specify pipe size, figure number, name and finish.